Master Bathroom Project

Master Bathroom Project

This project was probably my biggest tile project i’ve tackled to date.  I used 16” square travertine on the floor set at 45 deg angle to the wall.  The walls and shower floor is 12” travertine.  This project is one I wouldn’t do again mainly because it required a lot of layout decision making.  Since I picked at this project over the course of 3 years while simultaneously working on other parts of the house it was difficult to keep track of where I left off.  Its now done and that is a big...

Read More

Bathroom Sink in Copper

Bathroom Sink in Copper

This sink is part of the 1/2 bath laundry room.  Sink base is 2 layers of 3/4 plywood wrapped in 20 oz copper.  Walls are also 20 oz copper.  All copper surfaces were sprayed with a UV clear coat to protect color.   2010 UPDATE: Sink is still in the same visual condition with only minor UV coat scratches.  I’m wanting to provide additional support to the sink base (left).  People tend to lean on it when standing up from the toilet. This has caused that side to drop slightly.   Other modifications will include a 1/4” copper square bar detail on the inside edges and the removal of the GFI if I can find a copper colored...

Read More